Using a screwdriver, detach the support bracket -1-fairing -2-.
Unscrew screws -1- of fairing -2-. Pull the fairing upwards from the mounting frame -3-.
Installation
Install in reverse order. When installing, tighten the bolts to a torque of 2 Nm. The fairing bracket should click into place with an audible click. Once removed, the support bracket bracket must be replaced.
Removing the Fairing Bracket
Removing the fairing. Press the locating pin -2- out of the top strip -1- and the fairing support -3-.
Pull fairing bracket -1- in direction -arrow- from top strip -5-. Pull the brace -2- out of the lower bar -4- and the mesh -3-.
Installation
Insert the brace -2- through the mesh -3- to the bottom bar -4-.
Install in reverse order. Insert a new alignment pin to secure the fairing bracket.
Visitor comments