Open the sliding hatch completely. Using a small screwdriver "1", squeeze the fastening clip "2" of the fairing "3".
Remove the fastening clip "1" upwards from the hatch frame.
Remove fairing "1" from the side of the clamping bar "2". When installing, position fairing "1" in the direction of the arrow - in the center of the clamping bar "2". Press the retainer into the frame of the sliding hatch. In this case, the retainer should enter the hole "arrow" of the frame.
Replacing the fairing pivot spring
1. Retainer. Before removing, dismantle the fairing. Knock out the locking pin and remove the retainer from the fairing's textile casing
2. Locking pin
3. Fairing
4. Fairing pivot spring. Before removing, remove the fairing. Knock out the notched pin. Remove the pivot spring from the fairing guide
5. Punch pin
(The article is a reprint of material from: AUDImanual)