Instructions: Removal without damaging the glass is not provided.
1. Front side glass
2. Glue roller. Take into account the different distance of the glue roller to the glass edge. Dimension "b" = at the rear edge of the glass = 16 mm±2 mm. Dimension "a" at the front and bottom edge of the glass = 9 mm±2 mm
3. Glass edging. Before installing the glass, use a knife to detach the edging in the lower area
4. B-pillar stop. When installing, move the glass back until the stop is flush with the B-pillar "arrow"
s. Strip of adhesive tape. Seal the glass opening with textile-based adhesive tape to avoid damaging the paintwork
b. String. Lay it along the entire perimeter of the glass behind the butt plate