1. Rear side glass. Before installation, it is necessary to lay a protective film for the Audi A2 side window -VAG 1474/16- from the inside between the trim parts and the glass frame to protect the trim
2. Glue roller. Take into account the different distances of the adhesive bead to the glass edge. Dimension -a- = at the leading edge of the glass = 15 mm±2 mm. Dimension -b- at bottom, rear and top glass edges = 9 mm±2 mm
3. Glass edging. Before installing the glass, use a knife to remove the frame in the lower area
4 C-pillar stop. When installing, slide the glass back until the stop rests on the C-pillar
5. A strip of adhesive tape. Seal the glass opening with textile-based adhesive tape to prevent damage to the paintwork
Visitor comments