1. Front molding. Loosen the bolts. Carefully remove the protective molding from the door. Installation: the surface to be glued must be free of glue, dust and oil. First, treat the outer metal body paneling with cleaning gasoline. Treat the surface to be glued with silicone remover and wipe the surface dry. Remove the protective film from the molding. Install the molding together with the guide pins on the door, as shown in the figure. Press the modding firmly over the entire surface. Screw in the bolt and tighten it to a torque of 2 Nm.
2. Phillips head bolt, 2 Nm
3. Threaded fastening. Inserted into the molding
4. Butt plate
5. Rear molding. Removal and installation are identical to the front door molding
[The article is a reprint of material from AUDImanual]