1. Threaded bushing (4 pcs.)
2. Retainer
3/4. Combination bolt, 1.5 Nm
5. Lid
6. Threaded bushing (2 pcs.)
7. B-pillar trim. Remove the cover. Remove the cover downwards. Unscrew the bolts from the threaded bushings. Remove the trim from the B-pillar. Installation: install the trim from above into the bracket and move it to a distance of "a" = 0.7 mm towards the roof frame. Screw in the bolts. Insert the cover from below and press it into the mount. Dimension "b" = 1.5 mm
8. Combination bolt, 1.5 Nm
9. Fastening
10. Cover. When installing, first insert into the B-pillar trim from below, then press into the fastening. Adjust the size "b" = 1.5 mm by moving the trim, set the distance "a" to the roof frame to no more than 0.7 mm
(The original version is on the portal «AUDIMANUAL.ru»)