Table of contents: Removal ↓ Installation ↓
Removal
Tape the top and bottom of the case to protect the case from damage.
Using a flat plastic spatula, carefully remove the mirror glass, first from the bottom, then from the top.
Installation
Insert the mirror glass into the guide pins and friction pins 8 (fig. 12.64) into the friction spring and snap it into place. While doing this, press on the middle of the glass.
Fig. 12.64. Outside rearview mirror
1 - mirror housing,
Can be removed with the mirror installed.
2 - mirror position adjustment mechanism,
3 - door frame,
4 - bolt, 12 Nm,
5 - seal,
6 - screw,
7 - mirror glass,
8 - friction pin,
9 - friction spring.
(The original article is available on the online resource: AudiManual.ru)