To remove the rear view mirror, push it downwards
2. To install mirror 1, rotate it 60-90° relative to the mounting position, place it against the support (arrow A) and rotate in the direction of the arrow until the locking clamps engage.
When installing the mirror, rotate it relative to the mounting position
3. If it is an auto-dimming mirror, first remove the cover of the wiring harness channel 2 so that the connector plug can be released from its mounting.
In the case of an automatically dimming mirror, disassembly begins with unfastening the cover of the channel for laying the wiring harness
4. When installing the auto-dimming mirror, do not use the wiring harness channel 2 for rotation.
When installing an auto-dimming mirror, the wiring harness channel for rotation cannot be used
5. During the functional check, with the rearview mirror installed and the ignition on, do not engage reverse gear. Cover or tape the photosensitive element at the front of the car. Shine a flashlight on the sensor at the rear of the car. The mirror should darken after a while.