Withdrawal
If present, remove cover 1 upwards (pic. 1.17).
Unclip the suction air pipe 2 (pic. 1.17).
Engine 1.8-I.Disconnect the hoses shown in figure 1.18.
Release the four clips 1 (pic. 1.19) and open the air filter cover. To make it easier to lift the cover, loosen the screw clamp 2 (pic. 1.19) and disconnect the air pipe from the air filter housing.
Remove the air filter element.
Installation
Be careful to clean the inside surfaces of the air cleaner cover and housing.
Install the filter element into the air filter housing.
Install the air filter cover and secure with clips.
Connect the air pipe to the air filter housing and secure it with a screw clamp.
Engine 1.8-I.Connect the hoses shown in Figure 1.18.
Install and clamp the air intake pipe 2 (pic. 1.17).
If available, install shroud 1 (pic. 1.17).
Visitor comments