1.0. Crankshaft:
1 - centering sleeve
2 - crankshaft gear
3 - crankshaft
4 - centering pin
5 - bar
6 - bar mounting bolt. Tightening torque - 22 Nm
7 - crankshaft main bearing cap fastening bolts
8 - crankshaft main bearing caps
9 - bar mounting bolts. Tightening torque - 22 Nm
10 - bar
11 - upper thrust half ring of the crankshaft main bearing
12 - upper shell of the crankshaft main bearing
13 - centering pin
14 - lower thrust half ring of the crankshaft main bearing
15 - lower shell of the crankshaft main bearing
16 - side bolts for fastening the crankshaft main bearing caps
1.0a. Tightening the crankshaft main bearing cap bolts:
1st pass - tighten bolts 1-8 to 60 Nm;
2nd pass - tighten bolts 1-8 by 90°;
3rd pass - tighten bolts 9-16 to 60 Nm;
4th pass - tighten bolts 1-8 by 90°;
5th pass - tighten bolts A to 28 Nm