4.0. Cylinder head:
1 - cylinder head
2 - cylinder head cover gasket
3 - a bolt of fastening of a head of the block of cylinders. Bolts must be replaced after each disassembly
4 - cylinder head cover
5 - oil filler seal
6 - sealing ring of the oil filler cap
7 - oil filler cap
8 - high pressure fuel lines of fuel injectors
9 - fuel return line
10 - sealing ring of the return fuel line
11 - hollow bolt for fastening the return fuel line. Tightening torque - 5 Nm
12 - intake manifold
13 - intake manifold mounting bolt. Tightening torque - 10 Nm. Tightening is carried out in several passes in a cross pattern
14 - intake manifold gasket. The gasket must be replaced after each disassembly
15 - centering sleeve (2 pcs.)
16 - a nut of fastening of a cover of a head of the block of cylinders. Tightening torque -10 Nm
17 - heat shield of the vacuum pump
18 - a bolt of fastening of the vacuum pump. Tightening torque - 10 Nm
19 - vacuum pump
20 - sealing rings of the vacuum pump. To be replaced after each disassembly
21 - cylinder head gasket
Visitor comments