Attention! For safety reasons, the driver should only move the seat longitudinally after the vehicle has stopped.
Adjusting the angle of the seatback is performed by turning the handle B, unloading the backrest.
Attention! The seat backs must not be folded back while driving. This reduces the restraining effect of the seat belts.
The height adjustment of the seat is carried out automatically using the handle C. To do this, the handle must be pressed in the desired direction.
On vehicles with sports equipment, the front seat is also automatically operated by pressing the lever on the side of the seat. In this case, the desired seat inclination can also be set at the same time.
With switch D (Ergomatic) the lumbar support of the seat back is adjusted, which moves forward or moves back. This changes the contour of the backrest in the lumbar region, providing comfort during long trips.
Pressing the corresponding arrow on the plane of the switch leads to a change in the contour of the backrest. Pressing the front arrow moves the backrest forward, pressing the back arrow moves it back, pressing the top arrow raises it, and lowers it by pressing the bottom arrow.
Visitor comments