6.0. Rear wheel brake with C38 caliper:
1 - bolt for fastening the caliper to the brake shoe guide. Tightening torque 35 Nm. The bolt is self-locking and therefore must be replaced every time it is dismantled. When unscrewing and tightening the bolt, the guide pin should be kept from turning with a wrench
2 - brake pads. It is mandatory to change all four pads at the same time
3 - a bolt of fastening of a directing brake shoes. Tightening torque 95 Nm
4 - brake shoe guide
with guide pins and their caps. Supplied complete with grease for guide pins. If the protective caps of the fingers are damaged, a new guide from the repair kit should be installed, and the fingers should be lubricated
5 - a bolt of fastening of a directing brake shoes. Tightening torque 95 Nm
6 - brake disc. When replacing, be sure to change both brake discs at the same time
7 - support
Visitor comments