8.0. Caliper FN3:
1 - protective caps guide pins. Run into bushings
2 - guide pins. Tightening torque 25 Nm
3 - bleed valve. Tightening torque 10 Nm
4 - fitting cap
5 - support
6 - clamping spring brake pads. The ends of the spring are inserted into the holes on the caliper
7 - guide pin bushing
8 - brake shoe guide
9 - wheel cylinder piston sealing ring
10 - piston. Lubricated with a thin layer of grease G052150A2 during installation
11 - piston collar
Visitor comments