8.0b. Caliper HP2:
1 - bleeder cap
2 - bleed valve. Before screwing in the fitting, it is recommended to lubricate its threads with a thin layer of protective grease G052150A2. Tightening torque 10 Nm
3- support. Consists of two parts connected by bolts with a head under a polyhedral socket wrench. Unscrewing the bolts and disconnecting the caliper is not allowed. If the caps of the guide pins are damaged, the caliper must be replaced as a set
4 - piston sealing rings
5 - pistons. Before installation, the pistons should be lubricated with a thin layer of protective grease G052150A2
6 - piston cuffs
Attention! The wheel cylinder of the new caliper is filled with brake fluid and bled of air.
Visitor comments