9.0. Brake master cylinder and brake booster:
1 - bolts with heads for a multi-sided socket wrench (insert /45) fastening the vacuum booster to the engine compartment bulkhead. Tightening torque 25 Nm
2 - self-locking nuts for fastening the cylinder to the vacuum booster. Tightening torque 49 Nm
3 - main brake cylinder. Diameter 23.81 mm
4, 5 - brake pipes. Tightening torque 15 Nm
6 - cylinder sealing ring on the vacuum booster. To be replaced after each dismantling
7 - brake booster
drive. Cannot be repaired, replaced as a set
8 - sealing gasket of the amplifier on the engine compartment bulkhead
9 - low pressure hose
10 - brake fluid reservoir
11 - tank lid
12 - sealing bushings of the reservoir on the main brake cylinder
13 - bypass hose from the brake fluid reservoir to the clutch master cylinder
14 - Engine compartment partition