#img1#
4.0. Aluminum caliper HP-2 front wheel with two pistons:
1 - brake disc
2 - support
3 - Brake pad wear sensor wire holder
4 - ribbed gasket
5 - caliper mounting bolt. Tightening torque 190 Nm. When reusing, clean the ribbed surface from dirt
6- pressure spring. The spring is non-removable. When dismantling it should be moved to the side
7 - clamp
8 - Brake pad wear sensor plug
9 - brake hose
10 - Hexagon head bolt for fastening the brake hose holder and the brake pad wear sensor plug. Tightening torque 25 Nm
11 - Brake hose and brake pad wear sensor plug holder
12 - brake pipe. Tightening torque 15 Nm
13 - brake pads. The left and right pads are different from each other and therefore it is necessary to be careful not to mix them up when installing. The brake pad wear indicator light comes on when the remaining pad thickness is 3 mm
4.0. Aluminum caliper HP-2 front wheel with two pistons:
1 - brake disc
2 - support
3 - Brake pad wear sensor wire holder
4 - ribbed gasket
5 - caliper mounting bolt. Tightening torque 190 Nm. When reusing, clean the ribbed surface from dirt
6- pressure spring. The spring is non-removable. When dismantling it should be moved to the side
7 - clamp
8 - Brake pad wear sensor plug
9 - brake hose
10 - Hexagon head bolt for fastening the brake hose holder and the brake pad wear sensor plug. Tightening torque 25 Nm
11 - Brake hose and brake pad wear sensor plug holder
12 - brake pipe. Tightening torque 15 Nm
13 - brake pads. The left and right pads are different from each other and therefore it is necessary to be careful not to mix them up when installing. The brake pad wear indicator light comes on when the remaining pad thickness is 3 mm
(Text provided by the online resource: AUDIMANUAL.RU)