Removal and installation the lane departure warning system control unit "J759" and the ambient light curtain
Remove curtain "1" from the bracket "in the direction of the arrow" downwards.
Press the retaining clip "1" in the direction of the arrow and remove the lane departure warning system control unit "J759" from the bracket at the side and downwards. Disconnect the connector and remove the lane departure warning system control unit "J759".
Press the "arrow" brackets, remove the diffused light curtain from the bracket and remove it back.
Installation
Installation in reverse order. The camera's field of view on the inside of the windshield should not be fogged or dirty, otherwise you will need to manually clean this area with a cleaning solution. If the lane departure warning system control unit "J759" is replaced, the camera and the lane departure warning system control unit "J759" must be recalibrated.