Note: Replacing the air cleaner filter element is described in Chapter 1.
1. The installation details of the air cleaner for 2.0 TFSI engines are shown in the illustration.
3.1. Installation details of the air cleaner for 2.0 TFSI engines 1. Hose, not used; 2. Air hose to the turbo compressor; 3. Clamp; 4. MAF sensor; 5.7. Bolt, 1.5 Nm; 6/8. Front beam air intake section/air cleaner; 9. Retainer; 10.13. Bolt, 1.5 Nm; 11. Air cleaner cover; 12. Heat shield; 14. Filter element; 15. Air cleaner housing; 16. Sealing ring; 17. Clamp, not used
2. The installation details of the air cleaner for 3.2 FSI engines are shown in the illustration.
3.2. Installation details of the air cleaner of the 3.2 FSI engine 1.3. Bolt, 1.5 Nm; 2. Air duct; 4/5. Front beam air intake section/air cleaner; 6. Mesh filter; 7. Sealing ring; 8. Air duct to the throttle body; 9. Rubber seal; 10. Retainer; 11. Bolt, 1.5 Nm; 12. Air cleaner cover; 13. Filter element; 14. Rubber gasket; 15. Air cleaner housing
3. On other engines, the air cleaner installation details are similar.