Withdrawal
1. Open the key bit.
2. Insert a screwdriver into the recess. Turn the screwdriver and remove the transmitter housing (1) from key part (2).
3. Remove the transmitter body from the key part.
4. Remove the cover (1) transmitter housing and remove the battery from the cover.
Installation
1. Insert a new battery into the transmitter housing cover so that the battery terminal «+» pointed down. The correct polarity is additionally indicated on the cap.
2. Place the cover on the transmitter body and press down.
3. Insert the body of the transmitter into the key part and squeeze both parts until they stop.
4. Check the operation of the remote control. If the vehicle opens and does not close, the remote control must be synchronized.
Synchronization
1. Models before 2002: Press any key on the remote control. Then manually open and close the door lock within one minute.
2. Models since 2003: If the car is closed, open the door manually. Press the remote control unlock key. Insert the key into the ignition switch, turn the ignition on and off again. Remove the key from the lock and press the unlock or lock key.
Visitor comments