Table of contents: Installation ↓ Adjustment ↓
1. Carefully pry and remove the cover (3) from the wiper shaft (1).
Warning: The jet is installed in the wiper shaft.
2. Carefully remove the nozzle (2) from the connecting tube.
Installation
1. Installation is performed in the reverse order of removal.
2. In this case, the nozzle is installed on the wiper axis in such a way that the hole points into the groove on the lever.
Adjustment
1. Adjust the nozzle so that the water stream hits the rear window above the wiper.
- a — 125 mm
- b — 295 mm
- c — 5 mm
[The original article is posted on the resource «AudiManual.ru»]