Removal and installation of the electric motor
Wiper parts: 1 - wiper motor; 2 - axle with wiper arm bushing; 3, 4 - drive rods; 5 - axis of the lever; 6 - crank; 7 - mounting bracket; 8 - remote bushing; 9 - cap; 10 - brush lever; 11 - brush; 12 - cleaning element.
Disconnect the wire from the negative battery terminal.
Remove both wiper arms.
Loosen the nuts on the axles of the wiper arms.
Loosen the windshield wiper bracket bolts.
Remove the windshield wiper bracket with motor.
Remove the motor from the wiper arm.
The windshield wiper motor is installed in the reverse order of removal. The levers of the brushes are installed so that the left brush is 36 mm away from the windshield seal (size «A»), and the right one - by 63 mm (size «b») (see photo).
Visitor comments