Table of contents: Removal ↓ Installation ↓
Removal
Remove the brake fluid from the master cylinder reservoir using a syringe.
Disconnect the lines from the master cylinder.
Loosen the nuts securing the master cylinder to the brake booster and remove the master cylinder.
If necessary, remove the reservoir from the master cylinder and remove the sealing rings.
Wash the parts with alcohol and check their condition.
Installation
Install the reservoir on the master brake cylinder.
Check the presence of the sealing ring on the master cylinder.
Install the master cylinder on the brake booster and tighten the mounting nuts to a torque of 1.5 kgf·m.
Connect the lines to the master cylinder.
Bleed the brake hydraulic system to remove air.
The original text of the material can be found on the website AUDIMANUAL