11.1. Additional fuel pump installation details:
1 - Electrical wiring connector;
2 - Nut, 9 Nm;
3 - Pump bracket 6;
4, 7 - Rubber holder, inserted with protrusions into bracket 3;
5 - Fuel hose;
6 - Additional fuel pump;
8 - Fuel hose, to the fuel filter.
2. Disconnect the connector (4 in the illustration) pump (2), pinch the hoses (1 and 3) and disconnect them from the pump.
11.2. Additional fuel pump connections.
3. Spray the ledges (2 and 4 in the illustration) pump holders (3) with silicone-free grease, unhook these tabs from the bracket (1) and remove the pump.
11.3. Removing the additional fuel pump.
4. Installation is carried out in reverse order. After installation, bleed the fuel supply system (see Section 14).