Gear shift mechanism I 1. Selector handle; 2. Decorative rosette; 3. Selector cuff; 4. Clamp; 5. Gearbox selector lever position display panel -Y26-; 6. Nut: for fastening the shift drive to the body; 4 things.; 10 Nm; 7. Gasket; 8. Used automatic transmission selector sensor -J587- with Tiptronic switch -F189-; 9. Functional block of the gear shift mechanism: replace only as an assembly; 10. Selector lever lock solenoid -N110-; 11. Selector lever position P switch -F305-: consists of 2 reed switches on the automatic transmission selector lock magnet board -N110-; Replacement is only possible together with the automatic transmission selector lever lock magnet -N110-; 12. Sound insulation: not installed on all vehicles; 13. Lock washers: for attaching the sound insulation to the functional block of the switching mechanism; 4 things.; replace; 14. Locking clamp: secures the automatic transmission selector cable to the functional block of the gear shift mechanism; 15. Seal ring: replace; 16. Gearbox selector cable: do not bend or kink; 17. Cover: above the selector lever lock solenoid -N110-
Gear shift mechanism I 1. Selector handle; 2. Decorative rosette; 3. Selector cuff; 4. Clamp; 5. Gearbox selector lever position display panel -Y26-; 6. Nut: for fastening the shift drive to the body; 4 things.; 10 Nm; 7. Gasket; 8. Used automatic transmission selector sensor -J587- with Tiptronic switch -F189-; 9. Functional block of the gear shift mechanism: replace only as an assembly; 10. Selector lever lock solenoid -N110-; 11. Selector lever position P switch -F305-: consists of 2 reed switches on the automatic transmission selector lock magnet board -N110-; Replacement is only possible together with the automatic transmission selector lever lock magnet -N110-; 12. Sound insulation: not installed on all vehicles; 13. Lock washers: for attaching the sound insulation to the functional block of the switching mechanism; 4 things.; replace; 14. Locking clamp: secures the automatic transmission selector cable to the functional block of the gear shift mechanism; 15. Seal ring: replace; 16. Gearbox selector cable: do not bend or kink; 17. Cover: above the selector lever lock solenoid -N110-
Visitor comments