Remove the wheel. Disconnect connector -3-. Remove bolt -1-. Unscrew bolts -2-.
Do not damage the mounting plate when doing this. Remove the vehicle's ride height sensor.
Only install a sensor of the same design. Treat and install the spare part accordingly. Screw in bolts -2-. Do not damage the mounting plate when doing this. When tightening screws -2-, hold the vehicle level sensor. The sensor lever must face outward. Screw in bolt -1-. Connect plug connector -3-. Perform basic headlight adjustment. After removing and installing the ride height sensor or unfastening the linkages on vehicles with an electronic damping control system, you must adapt the adjustment position. After recalibrating the adjustment position on vehicles with lane assist, the lane departure warning control unit -J759- must be recalibrated.
Visitor comments