11.0. Oil pan:
1 - oil pan mounting bolt. Tightening torque - 10 Nm
2 - lower part of the oil pan
3 - oil pump chain cover
4 - sealing gasket. Installed on cars manufactured up to approximately 11.1998. Starting from 12.1998, the oil pan seal is made with a sealant
5 - oil pump chain cover fastening bolt. Tightening torque - 10 Nm
6 - oil pump mounting bolt. Tightening torque - 22 Nm
7 - oil pump
8 - oil pump drive chain
9 - oil pump sprocket
10 - bolt for fastening the sprocket to the oil pump shaft. Tightening torque - 22 Nm
11 - sealing ring. To be replaced after each dismantling
12 - bolt for fastening the upper part of the oil pan. Tightening torque - 10 Nm
13 - hollow bolt. Tightening torque - 10 Nm
14 - oil pan upper part mounting bolts. Tightening torque: M6 bolts to cylinder block - 13 Nm; m6 bolts to flange - 10 Nm; bolts M7 - 16 Nm
15 - front engine mount mounting bolt. Tightening torque - 45 Nm
16 - Front engine mount
17 - oil dipstick guide tube sealing ring. To be replaced after each dismantling
18 - oil dipstick guide tube
19 - sealing gasket. Installed on cars manufactured up to approximately 05.1998. Starting from 06.1998, the sealing of the upper part of the oil pan is performed with a sealant
20 - Upper part of the oil pan
21 - bolt. Tightening torque - 45 Nm
22 - balance shaft oil line
23 - hollow bolt for fastening the oil line. Tightening torque -10 Nm
24 - oil line sealing ring
25 - oil line mounting bolt. Tightening torque -10 Nm
26 - oil pipeline
27 - balance shaft sprocket mounting bolt. Tightening torque - 45 Nm
28 - balance shaft housing
29 - balance shaft housing mounting bolt. Tightening torque - 10 Nm
30 - guide sprocket mounting bolt. Tightening torque - 10 Nm
31 - guide sprocket
32 - balance shaft housing mounting bolt. Tightening torque - 22 Nm
33 - balance shaft shield
34 - balance shaft shield mounting bolt. Tightening torque - 10 Nm
35 - drain plug thread. Tightening torque - 25 Nm
36 - drain hole sealing plug. To be replaced after each dismantling