Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the front wheels, corresponding fender liner and bumper.
2. Remove the door bracket 2 from the wing 4 by unscrewing the screws 1 from the expansion clamps 3 (see illustration).
7.2. Remove the door bracket 2 from the wing 4 by unscrewing the screws 1 from the expansion clamps 3
3. Remove the headlights and side turn signal, see the relevant chapter.
4. Unscrew bolts 2-6 and remove the wing (see illustration 7.0).
7.0. Front fender assembly
Installation
5. Restore the paint finish of the wing if necessary.
6. Install the wing in place and secure with bolts 2-6 (see illustration 7.0).
Attention! Make sure that the gaps between the wings are maintained within the nominal dimensions.
The installation of the remaining dismantled parts is carried out in the reverse order of removal.