Elements of the clutch release mechanism (gearbox 01E)
- 1. Gearbox
- 2. intermediate fastening
- 3. Oil seal
- 4. Guide sleeve
- 5. Bolt
- 6. Clutch release lever
- 7. Spring
- 8. Bolt
- 9. Release bearing
Withdrawal
1. Remove the gearbox.
2. Remove the clutch release lever from the ball joint. On the gearbox 012, depress the spring clip and remove the lever from the support.
3. Remove the bearing from the lever (gearbox 012).
4. On models with 01E gearbox, unscrew the fixing bolt and remove the elastic plate. Remove bearing and lever.
Inspection
Check the ease of rotation of the bearing. Replace bearing if worn.
Installation
1. Lubricate the ball joint and the clutch release lever pivot with copper grease. Lubricate the release bearing.
2. On the 012 gearbox, install the spring on the clutch release lever and insert the spring into the hole.
3. Reinstall the lever and bearing. Tighten the mounting bolt. Install the lever on the ball joint so that the spring clip fixes the lever.
4. On models with a 01E gearbox, install the intermediate mount on the lever, then install the lever and bearing in place. Tighten the mounting bolt.
Visitor comments