Clutch pedal fasteners
- 1. Bracket
- 2. Nut
- 3. Washer
- 4. Brake pedal
- 5. Spring
- 6. Washer
- 7. Tube
- 8. Clutch pedal
- 9. Sleeve
- 10. Ring
- 11. Lever
- 12. Clutch release master cylinder
- 13. Bolt
- 14. Fork
- 15. Pin
- 16. Retaining ring
- 17. Bolt
- 18. Bracket
- 19. Washer
- 20. Nut
- 21. Hose
- 22. Spring
- 23. Clamp
- 24. Switch lights stop crane
- 25. Cruise control valve
Right hand drive models
Withdrawal
The clutch pedal is removed together with the mounting bracket.
1. Remove trim panel.
2. Disconnect the master cylinder push rod from the clutch pedal and remove the master cylinder from the bracket.
3. Disconnect the wires from the switches on the bracket.
4. Unscrew the fixing nuts and remove the bracket together with the pedals.
Installation
Installation is carried out in the reverse order of removal.
Left hand drive models
Withdrawal
1. Remove trim panel.
2. Disconnect the master cylinder pushrod from the clutch pedal.
3. Install the mounting clip on the spring and remove it.
4. Remove the clutch pedal.
Installation
Installation is carried out in the reverse order of removal.
Visitor comments