Table of contents: Front crankshaft oil seal ↓ Rear crankshaft oil seal ↓
Front crankshaft oil seal
1. Remove the timing belt and crankshaft sprocket.
2. Drill two holes in the seal, screw in the screws and remove the seal.
3. Lubricate the new seal with oil and hammer it into place.
Rear crankshaft oil seal
1. Remove the flywheel.
2. Drill two holes in the seal, screw screws into them and remove the seal, or remove the seal housing and knock the seal out of the housing.
3. Lubricate the new seal with oil and hammer it into place.