Front crankshaft oil seal
1. Remove the timing belt and crankshaft sprocket.
2. Drill two holes in the gland, screw the screws into them.
3. Remove the stuffing box, or remove the stuffing box casing and knock the stuffing box out of the casing.
4. Drive in a new seal.
5. Install the seal housing in place.
Rear crankshaft oil seal
1. Remove flywheel.
2. Drill two holes in the gland, screw the screws into them.
3. Remove the stuffing box, or remove the stuffing box casing and knock the stuffing box out of the casing.
4. Drive in a new oil seal and install the oil seal housing in place.
Visitor comments