Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the brake drum.
2. To reduce brake fluid loss, remove the brake fluid reservoir cap and seal the neck tightly with plastic wrap or clamp the corresponding brake hoses.
3. Disconnect the upper return spring and move the shoes away from the wheel cylinder.
4. Disconnect the brake pipe.
5. Unscrew the two mounting bolts and remove it. The wheel cylinder cannot be repaired. If the cylinder is faulty, it must be replaced.
Installation
Installation is carried out in the reverse order of removal.
This article was previously published on the resource audimanual.ru