Removal and installation the rear seat (Audi A4 B6)

Depending on the equipment, the rear seat can be split or one-piece. The work on dismantling and installing is described using the example of a one-piece seat. The split seat can be dismantled in the same way.

1. To remove the rear seat, lift it slightly in direction A and pull it in direction B.



2. Remove the side airbag cable connector 1 from the groove.



3. When installing the rear seat, first insert the side airbag connector plug. Then slide the seat in direction A. Insert the mounting eyes into the plastic bushings in direction B.



(The original article is available on the online resource: audimanual)