Caution! Risk of damage to the gearbox. Do not start the engine if there is no ATF in the gearbox or ATF oil pan. A dirty or faulty mechatronic system must be replaced. Lubricate the O-rings and shaft seal with ATF. The use of other lubricants will cause malfunctions in the hydraulic control unit of the gearbox.
I 1. Bolt: 13 pieces, replace; 2.5 Nm + 90°; observe the tightening sequence; oil pan to gearbox; 2. ATF drain plug thread: 12 Nm; replace; 3. ATF inspection plug: 9 Nm; 4/11. O-ring: replace; 5. ATF oil pan; 6. Magnet: 2pcs round magnet, there are differences from the picture; ensure complete adhesion; clean before installation; 7. Shielding cap: Installed in the oil pan hole; 8. Not installed; 9. Oil pan gasket: replace; 10. Mesh oil filter; 12. Wiring harness plug retaining clip; 13. Wiring harness in the gearbox; 14. Bolt: 8 Nm; follow the instructions for removal and installation; 15. Mechatronik; 16. Sealing element
The original publication in its entirety is posted on the website AudiManual.ru