Fuel filter and accessories fuel pump -V393- 1. Holder: for fuel. filter and additional fuel pump -V393-; 2. Rubber bushing: fixed to the body; 3. Rubber support: to additional fuel pump -V393-; 4. Additional fuel. pump -V393-: available depending on design; the direction of fuel flow is indicated by arrows; do not mix up the pipes when connecting; 5/8/10/11/13/17. Fuel hose; 6. Control valve: available depending on design; The flow direction is marked with the letters,,VL", "RL" and arrows; do not mix up the pipes when connecting; 7. Fuel supply line: from the fuel supply module; 9. Return fuel. line: to the fuel supply module; 12. Return fuel. line: from the engine; 14. Fuel filter: the direction of fuel flow is indicated by arrows; do not mix up the pipes when connecting; 15. Rubber support: for fuel. filter; 16. Fuel supply line: to the engine; 18. Nut: 8 Nm
Removing fuel filter
Remove the right underbody trim. Unscrew nuts -1- and -2-. Move the bracket -3-down, lift it from the body -arrows- and remove it.
Place under fuel. filter pan. Remove fuel hoses -1- and -4-. Remove return fuel. line -3- from the rubber support -2-. Remove fuel filter -5- with rubber supports.
Install
Installation is in reverse order, observing the following. The direction of fuel flow is indicated by arrows on the filter housing. Install the right underbody trim. Risk of destruction of the high pressure pump during operation "dry". After replacing the fuel filter, fuel highways or additional fuel pump -V393-, before starting the engine for the first time, bleed fuel. system. Bleed fuel system.
Visitor comments