Oil cooler, pressure regulating valve and oil filter housing. II 1. Mounting plate: oil radiator, crankcase ventilation pressure control valve, oil filter housing; 2/8/14/18/23/28. Bolt: 9 Nm; 3. Sealing cuff: replace; 4. Oil pressure sensor for reduced pressure "F378": switching pressure 0.75...1.05 bar; gray insulation; check in "Guided Troubleshooting"; 20 Nm; 5. O-rings: replace 6/12/29. Gasket: replace; 7/10/20/21/27. O-ring: replace; 9. Oil feed line: to turbocharger; 11. Oil filter element; 13. Cover: 35 Nm; 15. Support bracket: for oil filter housing; 16. Oil filter housing: with oil filter bypass valve for 2.0...3.0 bar (pressure difference before/after filter); 17. Pressure control valve in the engine crankcase ventilation system; 19. Engine crankcase ventilation tube; 22. Oil radiator: follow the instructions; with oil cooler bypass valve 2.0. 3.0 bar (pressure difference before/after oil radiator); 24. Gaskets: replace; 25. Cooling system hose; 26. Coolant pipe, upper
[This publication is borrowed from the resource audimanual.ru]