4.0. Cardan shaft elements:
1 - rear axle differential
2 - cardan shaft
3 - adhesive seal. To be replaced after each disassembly. Before installation, remove the foil from the new seal, which covers the adhesive layer
4 - gasket
5 - a bolt with a head under a hex socket wrench. Tightening torque 55 Nm. must be replaced after each disassembly
6 - adjusting washer
7 - nut. Tightening torque 25 Nm
8 - hairpin. Do not unscrew!
9 - gearbox
Visitor comments