Table of contents: Removal ↓ Installation ↓
Removal
1. Disconnect the additional catalytic converter.
2. Remove the air filter cover 2 and disconnect the air intake 1 (see illustration).
7.2. Remove the air filter cover 2 and disconnect the air intake 1
3. Disconnect plug 4 and hose 2 from the air filter housing by loosening clamp 3 (see illustration).
7.3. Disconnect plug 4 and hose 2 from the air filter housing by loosening clamp 3
4. Unscrew bolt 1 of the fastening (see illustration 7.3) and remove the air filter housing.
5. Disconnect the turbocharger hose from the air filter supply duct by loosening its fastening clamps (see arrows in the illustration).
7.5. Disconnect the turbocharger hose from the air filter supply air duct by loosening its fastening clamps (see arrows)
6. Disconnect the hose (see arrow in illustration) low pressure from the vacuum valve of the supercharger turbine blade drive.
7.6. Disconnect the hose (see arrow) low pressure from the vacuum valve of the supercharger turbine blade drive
7. Loosen clamps 1 and disconnect the hose from the turbocharger by moving it in the direction indicated by the arrow in the illustration.
7.7. Loosen clamps 1 and disconnect the hose from the turbocharger by moving it in the direction indicated by the arrow
8. Release the oil line from holder 1 and disconnect it from the turbocharger, and if necessary, from holder 2 on the cylinder head (see illustration).
7.8. Release the oil line from holder 1 and disconnect it from the turbocharger, and if necessary, from holder 2 on the cylinder head
9. Unscrew the four nuts securing the turbocharger to the support bracket and remove the turbocharger (see illustration).
7.9. Unscrew the four nuts securing the turbocharger to the support bracket and remove the turbocharger
Installation
The turbocharger is installed in the reverse order of removal.