5.0. Steering knuckle and connected suspension elements:
1 - steering knuckle
2 - hexagonal nut of the tie bolt of the ball joint pins of the upper arms
3 - bolt for fastening the steering knuckle to the body
4 - wheel alignment screw. Tightening torque 7 Nm
5 - hexagonal self-locking nut of the bolt securing the steering knuckle to the body. Tightening torque 45 Nm
6 - hub bearing
7 - hub
8 - hub bolt. Tightening torque 200 Nm + 180° turn. To be replaced after each dismantling.
9 - Tightening bolt with hexagonal head of the ball joint pins of the upper arms. Tightening torque 45 Nm
10 - brake mechanism shield
11 - socket head bolts. Tightening torque 10 Nm
12 - ABS sensor
13 - socket head bolt for ABS sensor mounting. Tightening torque 8 Nm
14 - hexagonal self-locking nut of the ball joint pin of the supporting arm. Tightening torque 110 Nm
15 - hexagonal self-locking nut of the ball joint pin of the guide arm. Tightening torque 110 Nm
16 - support arm
17 - guide lever
18 - hub mounting bolts. Tightening torque 80 Nm + 90° turn. To be replaced after each dismantling
19 - Bolt with a twelve-sided socket head for fastening the drive shaft. Tightening torque 70 Nm
20 - drive shaft