ADR engine
Removal
1. Remove the casing.
2. Press down on the coil connection connector and disconnect it.
3. Unscrew the fastening nut and disconnect the ground wire.
4. Loosen the mounting bolts.
5. Disconnect the wires from spark plugs N1 and 2, remove the ignition coil, disconnecting the remaining wires.
Installation
Installation is carried out in the reverse order of removal.
AAE, ACE and ABK Engine
Removal
1. Disconnect the wires from the ignition coil.
2. Loosen the mounting screws and remove the coil.
Installation
Installation is carried out in the reverse order of removal.
AAR Engine
Removal
1. Disconnect the wires from the ignition coil.
2. Loosen the tension bolt and remove the coil.
Installation
Installation is carried out in the reverse order of removal.