Withdrawal
4-cylinder engines
1. Drain the coolant.
2. Remove drive belts.
3. Remove the generator.
4. Remove the power steering pump.
5. Loosen the mounting bolts and remove the pump pulley.
6. Remove the mounting brackets for the alternator and power steering pump.
7. Disconnect the water hoses from the pump.
8. Loosen the fixing screws.
9. Remove the pump.
10. Remove the sealing ring.
11. Unscrew the mounting bolts and remove the pump and gasket.
5-cylinder engines
1. Drain the coolant.
2. Remove the rear timing belt cover.
3. Remove the power steering pump and mounting bracket.
4. Unscrew the fixing bolts and remove the pump.
Installation
Installation is carried out in the reverse order of removal. Install a new pump o-ring.
Visitor comments