Withdrawal
Caution: The brake light switch can only be installed once. Once removed, it must be replaced.
1. Remove the driver's side pocket, refer to Section Removal and installation of a pocket from the driver's side.
2. Squeeze the plug (2) in the direction of the arrow and disconnect the connection.
3. Turn the brake light switch 45°to the left to release it. Remove the brake light switch.
Installation
1. At the new brake light switch, completely remove the pusher (arrow on accompanying illustration).
Caution: Do not depress the brake pedal during installation.
2. Insert the switch with your lock bars (1) And (2) into the grooves of the pedal support and lock by turning 45°to the right. The switch position must be secure. When installing the switch, the pusher itself takes the correct position.
3. Fix the plug of the brake light switch, check the operation of the switch.
4. Reinstall the pocket on the driver's side, refer to Section Removal and installation of a pocket from the driver's side.
Visitor comments