1. Bolt, 10 Nm
2. Toothed belt guard, rear
3. Camshaft pulley
4. Timing belt cover, upper
5. Bolt, 45 Nm
6. High pressure fuel pump
7. Bracket
8. Tension roller
9. Nut, 45 Nm
10. Console
11. Bolt, 25 Nm
12. High pressure fuel pump gear
13. Countershaft gear
14. Toothed belt
15. Shaft distributor gear pulley
16. Bolt. Insert lubricated, maintain the specified tightening torque.
- 16 point bolt: 180 Nm, 12 point bolt: 90 Nm + ½ turn (180°). The bolt can be turned in several passes, it is only important to observe the turning angle of 180°.
- The 12-point bolt must be replaced. Use VW-3099 as anti-rotation device for turning and screwing.
17. Toothed belt cover, lower
18. Vibration damper. Only turbodiesel
19. Double belt pulley
20. Alternator V-belt. Check the tension by pressing with your finger. New belt: deflection about 2 mm; run-in belt: deflection about 5 mm.
21. Power steering V-belt. Check the tension by pressing with your finger. New belt: deflection about 2 mm; run-in belt: deflection about 5 mm.
22. Water pump V-belt. Pressing to check by pressing a finger. New belt: deflection about 2 mm; run-in belt: deflection about 5 mm.
Visitor comments