- two levers «A» to adjust the direction of the air flow: the left lever to the feet of passengers and the driver, the right one to the windshield and side windows (when moving the levers to the edges, the air flow increases, towards the middle it weakens);
- lever arm «B» for air temperature control (when the lever is moved to the right, the air temperature increases, to the left it decreases, in the leftmost position the heater is turned off).
switch «IN» one of the three speeds of rotation of the heater fan is set.
Air enters the cabin through two nozzles with deflectors at the edges of the instrument panel. The flow direction is adjusted horizontally by the central lever, vertically by moving the deflector plates.
Through two nozzles in the middle of the instrument panel, only cold air enters.
To blow the windshield, move the lever «A» all the way to the right. In this case, the air is directed to the windshield and side nozzles. Move lever «B» all the way to the right, which corresponds to the maximum air temperature. Switch «IN» the heater fan must be set to the second fixed position, and the knurled handle of the side nozzles must be set to the position «3» («Closed»).
To blow the side windows, install the levers «A» And «B» and the heater fan switch, as when blowing the windshield. Set the knurled handle of the nozzles to the position «ABOUT» («Open»). Direct the deflector plates towards the side windows.
Air conditioner
On some cars, an air conditioner was installed on request. The air conditioner is used to cool the air taken inside the car at high outside temperatures. The air conditioner fan has four speeds.
To turn on the air conditioner, press the button located above the heater fan switch. At the same time, the green control lamp in the button lights up.
Set the air distribution levers to the middle position.
Close the heater valve by setting the lever to the extreme left position.
Open the central and side ventilation nozzles, adjust the flow and direction of air supply through them.
Set the heater fan switch to position «4».
If the temperature of the cooled air is extremely low, move the heater valve control lever slightly to the right and switch the fan to a lower speed.
Visitor comments