- Brake mounting bolt to steering knuckle: 7.0*.
- Girling brake caliper mounting bolt: 3.5.
- Protective cover mounting bolt: 1.0.
- Brake shield mounting bolt to axle: 5.0.
- Nut securing the master brake cylinder to the vacuum booster: 1.5.
- Wheel mounting bolt: 9.0.
*Since February 1982, new bolts were used to secure the front brakes to the steering knuckles. On vehicles starting with chassis number 81 CA 115 387, M10x30 conical head bolts were installed instead of hexagonal bolts. The tightening torque of the bolts was 7 kgf·m. The holes for the bolts on the calipers were made with beveled edges.
[This article was copied from an online resource AUDIMANUAL.RU]