Radiator and radiator fan 1. Used radiator fans -J293-; 2. Bolt: 2.5 Nm; 3/24. Bolt: 5 Nm; 4. Fan frame; 5. Radiator fan -V7-: with built-in and separate used radiator fan -J293-; 6. Bolt: 4.5 Nm; 7. Lining; 8. Rubber support: for radiator; 9. Cooling system hose: to remove, release the clamp; connect to the radiator; 10/13/19/21. Seal ring: replace; 11. Coolant hose: from the cylinder head; 12. Cooling system hose: to ext. tank; 14. Radiator: after replacing, drain the old one and fill with new coolant; 15. Locking bolt: unlock with a screwdriver and remove; 16. Rubber buffer; 17. Radiator console; 18. Bolt: 5.5 Nm; 20. Cooling system hose: to remove, release the clamp; connect to the radiator; 22. Drain plug; 23. Radiator fan 2-V177-
Connecting the coolant hose using union connectors
Remove old seal. ring -2- from coolant hose -3-. Moisten the new seal. coolant ring and insert into the coolant hose. Push the coolant hose onto the coolant pipe -1- until it clicks. Push in the coolant hose again and pull on the hose to ensure that the coupling is properly secured.
Visitor comments