Remove the exhaust pipe. Remove and set aside the particulate filter. Unscrew the nut -1- and release the ground wire on the engine support bracket.
Unscrew bolts -arrows- and remove right engine mount.
Unscrew the screw -1- of the line holder -2-.
Disconnect el. plug connection -3-, to do this, push the fuse back and press the release lever down. Unscrew the 30/V+ -2- cable terminal from the starter. Unscrew bolts -1- and -4- and remove starter.
Access to -pos. 1 - available on top.
Installation
Installation in reverse order: Risk of damage to the starter. When tightening bolt -2-, a spacer sleeve -arrow- must be installed between starter and gearbox.
Install the engine support and bracket on the right. Install the turbocharger support. Install the particulate filter and front muffler. Install a stretcher. Connect the battery.
Visitor comments