Overview of Generator Installation with Sliding Bushings (Audi Q5-8R)

Overview of Generator Installation with Sliding Bushings 1. Bolts. 23 Nm; 2. Generator; 3. Bushing. Since tight bushings have low clamping force despite the correct tightening torque, bushings must be designed; 4. Electrical plug connection; 5. Nut. 16 Nm; 6. Plug; 7. Terminal 30/AKB+

The article was checked by auto expert Timur Bazhenov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Audi Q Q5 Type 8R: Power devices

Generator without sliding bushings
Preparatory work before charging the battery
Removal the battery
Disconnecting and connecting the battery

Removal the starter. Cars with a 2.0 l TDI engine
Removal the starter. Car with a 3.0 l TDI engine without an…
Removal the starter, cars with a 3.2 l FSI engine
Removal the starter, cars with 2.0 l T01 engines and manual…