"Pos. 3" do not take into account. Unscrew nut "1" and release the ground wire on the engine support bracket. Unscrew the bolts "arrows" and remove the right engine support.
In the figure the engine support is shown without thermal insulation. Disconnect the electrical plug connection "3" by moving the fuse back and pressing the release lever down. Unscrew the terminal of the 30/V+ cable "2" from the starter. Unscrew the bolts "1" and "4" and remove the starter.
Access to "pos. 1" is from above.
Installation
Installation in reverse order: install the support and engine support bracket on the right. Install the coolant pipe on the bottom right. Install the generator. Install the exhaust pipe. Connect the battery.
[A link to the original source is available on the website AUDIMANUAL]